Use our optimized L3 Firmware and configure merged mining of LTC + DOGE in your pool!
Our official Telegram account is @CRYPTOMINE_CC – Any other accounts are impersonators / scammers

ANTMINER S19j PRO OVERCLOCK FIRMWARE INSTALLATION

Release Version: S19j Pro Xilinx 1.1.7
Size: 16.0 MB
DevFee: 2.8%
Date Updated: 03/07/2022
SHA1: 62e82b7c57ba1d5b56ccc9e0212ce07640938fec
MD5: 91bdf990b62c17143d271eb649570969
Filename: Antminer-S19jPro-1.1.7-sd.img-cryptomine.gz

Release Version: S19j Pro BeagleBone 1.1.7
Size: 15.5 MB
DevFee: 2.8%
Date Updated: 03/07/2022
SHA1: 890fddb4e6c9d019d98297bfc686b47e05ce5e8b
MD5: 7f2f4f1313862223ff9b5e7247c25c58
Filename: Antminer-S19jPro-1.1.7-bb-sd.img-cryptomine.gz

VERY IMPORTANT!

MAKE SURE THAT YOUR CONTROL BOARD AND MINER REVISION (MODEL) IS COMPATIBLE WITH OUR FIRMWARE

COMPATIBLE CONTROL BOARDS

Xilinx Control Boards with SD Slot (on the front)

BeagleBone Control Boards with SD Slot (hidden inside the cover)

COMPATIBLE MODELS

S19 Model 240-Ca
S19 Pro
Model 240-C
S19j
Model 240-Cb
S19j Pro
Model 240-Cb
S19a
Model 240-Cb
S19a Pro
Model 240-Cb
T19
All Models

INCOMPATIBLE CONTROL BOARDS

Amlogic A113D Control Boards with Micro-USB Slot (on the front)

INCOMPATIBLE MODELS

S19 Model 240-Ch

INSTRUCTIONS:

1. Determine which firmware version you need. If you have Xilinx control board, select the firmware version stated for your miner model. If you have the BeagleBone control board, ensure that it says “-bb-” in the filename of the firmware you desire

2. Prepare microSD card no larger than 16 GB (important!)

3. Extract firmware image to a folder on your PC

4. Use balenaEtcher to write image (.img) file to your SD card

5. Turn off miner before inserting SD card, then turn it on once inserted

6. Leave the SD card inserted while running – we load our firmware from the SD card but not write to memory, therefore it must remain inserted at all times

7. Default password: admin

If you have an existing password, it must not contain any special characters, must be no more than 8 characters long, and only alphanumeric (numbers and letters only).

Our Antminer S19 Pro / S19j Pro Presets:

[2700W] Profile 96TH
[2970W] Profile 100TH
[3080W] Profile 104TH
[3320W] Profile 110TH
[3580W] Profile 115TH
[3670W] Profile 120TH
[3850W] Profile 125TH
[4110W] Profile 130TH LC*
[4620W] Profile 135TH LC*
[4880W] Profile 140TH LC**

*LC = Liquid Cooling (Immersion)
**Power supply upgrade required

Changelog By Version

Initial Release

Technical Support

If you need any assistance, please contact us via the support chat or directly on Telegram.

small_c_popup.png

Secure your spot on our waitlist!

Questions about bitcoin mining?